- Home
- » Products
- » AFM Probes
- » PPP-CONTSCAu
PPP-CONTSCAu Specification Sheet
AFM Probe Type: PPP-CONTSCAu
-
Call us: + 49 (0) 6441 870 6272 Wetzlar, Germany
- + 49 (0) 6 441 870 6 272
- + 49 (0) 6 441 870 6 274
- info@nanoandmore.com
- close
Order this product
Print spec sheet
Get a free sample
Product Description:
The new PointProbe® Plus (PPP) combines the well-known features of the proven PointProbe® series such as high application versatility and compatibility with most commercial SPMs with a further reduced and more reproducible tip radius as well as a more defined tip shape.
The NANOSENSORS™ PPP-CONTSCAu is an alternative cantilever type for contact mode applications. The length of cantilever is reduced with respect to the preferred contact mode type enabling easier exchange with non-contact mode probes for some AFM instruments. Additionally, this probe type allows the application for lateral or friction force mode.
The probe offers unique features:
- metallic conductivity of the tip
- Au coating on both sides of the cantilever
- chemically inert
- precise alignment of the cantilever position (within +/- 2 µm) in conjunction with the usage of
the alignment chip
- compatible with PointProbe® Plus XY-Alignment Series
Please note: Wear at the tip can occur if operating in contact-, friction- or force modulation mode.
This product features alignment grooves on the backside of the holder chip.
Application Modes:
AFM Probe Specifications:
AFM Cantilever(s):
| cant. | shape | length | width | thickness | force const. | res. freq. | probe base |
|---|---|---|---|---|---|---|---|
| beam | 225 µm (215 - 235 µm)* | 48 µm (40 - 55 µm)* | 1 µm (0.1 - 2 µm)* | 0.2 N/m (0.01 - 1.87 N/m)* | 23 kHz (1 - 57 kHz)* | ||
AFM Tips:
| cant. | shape | tip height | tip set back | tip radius | full cone angle | half cone angle | |
|---|---|---|---|---|---|---|---|
| Standard | 0 µm | 0 - 0 µm* | 0 µm (0 - 0 µm)* |
* guaranteed range
Coating:
A metallic layer (gold) is coated on both sides of the cantilever. The tip side coating enhances the conductivity of the tip and allows electrical contacts - the typical tip radius of curvature is less than 50nm. The detector side coating enhances the reflectivity of the laser beam by a factor of 2.5 and prevents light from interfering within the cantilever. The coating process is optimized for stress compensation. The bending of the cantilever due to stress is less than 3.5% of the cantilever length.Probes Datasheets:
Datasheet for all AFM probes with sets of 10 probes.Purchasing Information
Product Availability:
On stock
Price Description:
Does not include VAT or customs duties.
Payment within 30 days from date of invoice, no discount. Payment free of bank chargesTerms & Conditions:
Order:
| Order Code | Probes per Set | price, EUR | Quantity |
|---|---|---|---|
| PPP-CONTSCAu-10 | 10 pcs | 331.00 |
|