AFM Tip PPP-RT-FMR

PPP-RT-FMR datasheet

manufacturer:

www.nanosensors.com

View this AFM Tip
on manufacturer's website

AFM Probe Type: PPP-RT-FMR

Product Description:

The new PointProbe® Plus (PPP) combines the well-known features of the proven PointProbe® series such as high application versatility and compatibility with most commercial SPMs with a further reduced and more reproducible tip radius as well as a more defined tip shape. The excellent tip radius and the minimized variation in tip shape provide more reproducible images and enhanced resolution.

The FM type is offered for force modulation microscopy. The force constant of this AFM probe spans the gap between contact and non-contact mode and is specially tailored for the force modulation mode. The FM probe serves also as a basis for magnetic coatings (MFM). Furthermore non-contact or tapping mode operation is possible with the FM tip but with reduced operation stability.

For certain applications the rotated PointProbe® Plus Tip offers more symmetric imaging. The rotated tip shape is identical to the classic tip shape but it is rotated by 180° degrees with respect to the cantilever beam direction.

    The probe offers unique features:
        - excellent tip radius of curvature
        - highly doped to dissipate static charge
        - high mechanical Q-factor for high sensitivity
        - precise alignment of the cantilever position (within +/- 2 µm) in conjunction with the usage
          of the alignment chip
        - compatible with PointProbe® Plus XY-Alignment Series

This product features alignment grooves on the backside of the holder chip.

Application Modes:

Force Modulation AFM Probes (FM)

AFM Probe Specifications:

AFM Cantilevers:

Shape	Length	Width	Thickness	Force Const.	Res. Freq.
beam	225 µm(215 - 235 µm)*	28 µm(20 - 35 µm)*	3 µm(2 - 4 µm)*	2.8 N/m(0.5 - 9.5 N/m)*	75 kHz(45 - 115 kHz)*

AFM Tips:

Shape	Tip Radius
Rotated	<7 nm( < 10 nm guaranteed )

* guaranteed range

Coating:

The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 2% of the cantilever length.

Sensors Datasheets:

Datasheet for all AFM probes with sets of 10 or 20 probes.
Datasheet for up to 32 probes with full wafer.

Purchasing Info:

Product Availability:	From stock
Price Description:	Does not include VAT or customs duties.

Order:

Order Code	Sensors per Set	price, EUR
PPP-RT-FMR-10	10 pcs	276.00
PPP-RT-FMR-20	20 pcs	494.00
PPP-RT-FMR-50	50 pcs	1091.00

You are not logged in!
Log in to place your order!

e-mail:

pass:

your Basket is EMPTY

adding product
to shopping cart...

Terms and Conditions for NANOSENSORS