AFM Probes » ATEC-EFM

 Order  Request a quote (RFQ)
Order Code Price
Quantity
ATEC-EFM-10 Box of 10 AFM Probes
€768.00
ATEC-EFM-20 Box of 20 AFM Probes
€1 371.00
You save 165.00 EUR or 10.70% with this box
ATEC-EFM-50 Box of 50 AFM Probes
€3 029.00
You save 811.00 EUR or 21.10% with this box
esd kit

ESD Kit recommended with this product. Click here to order: ESD Kit

ATEC-EFM

Electrical, Force Modulation AFM Probe with REAL Tip Visibility

Coating: Electrically Conductive
Tip shape: Visible
Cantilever:
F 85 kHz
C 2.8 N/m
L 240 µm
*nominal values
NANOSENSORS AdvancedTEC™ EFM AFM tips are designed for force modulation mode imaging. They feature a tetrahedral tip that protrudes from the very end of the cantilever.

This unique feature allows precise positioning and makes the AdvancedTEC™ the only AFM scanning probe in the world that offers REAL TIP VISIBILITY FROM TOP, even when the probe is tilted due to its mounting onto the AFM head. This feature makes them the premium choice for all applications where the tip has to be placed exactly on the point of interest and/or has to be visible (e.g. Nanomanipulation).

Due to their very small half cone angles the tips of the AdvancedTEC™ Series show great performance on samples that have a small pattern size combined with steep sample features.

The probe offers unique features:
  • REAL TIP VISIBILITY FROM TOP
  • metallic conductivity of the tip
  • high mechanical Q-factor for high sensitivity
  • aspect ratio of the last 1.5 µm of the tip > 4:1 (from front and side)
  • tip shape is defined by real crystal planes resulting in highly reproducible geometries and extremely smooth surfaces
  • highly doped single crystal silicon (0.01-0.025 Ohm*cm)
  • rectangular cantilever with trapezoidal cross section
  • holder dimensions are 1.6 mm x 3.4 mm

Please note:
Wear at the tip can occur if operating in contact-, friction- or force modulation mode or where it is necessary to conduct high currents.
The PtIr5 coating is an approximately 25 nm thick double layer of chromium and platinum iridium5 on both sides of the cantilever. The tip side coating enhances the conductivity of the tip and allows electrical contacts. The detector side coating enhances the reflectivity of the laser beam by a factor of about 2 and prevents light from interfering within the cantilever. The coating process is optimized for stress compensation and wear resistance. The bending of the cantilever due to stress is less than 3.5% of the cantilever length.

AFM Tip:

  • AFM Cantilever:

  • Beam
  • 240 µm (230 - 250 µm)*
  • 35 µm (30 - 40 µm)*
  • 3 µm (2 - 4 µm)*
  • 2.8 N/m (0.7 - 9 N/m)*
  • 85 kHz (50 - 130 kHz)*
  • * guaranteed range

    Give us your feedback

    Did we miss any relevant information of this product?
    Did you find this or a comparable product for a better price?