AFM Probes » HQ:NSC14/Cr-Au

HQ:NSC14/Cr-Au

Gold Coated Soft Tapping Mode AFM Probe

Coating: Gold Overall
Tip shape: Rotated
Cantilever:
F 160 kHz
C 5 N/m
L 125 µm
*nominal values
Cantilevers of the 14 series are generally used in tapping mode for imaging relatively soft samples to obtain better phase contrast and reduce surface deformations caused by tip tapping. Probes with coatings can also be used in conductive AFM techniques.

Probes with overall conductive chemically inert 30 nm Au coating with 20 nm Cr sublayer on the tip and backside of the cantilever. Resulting tip radius is below 35 nm. The coating may cause cantilever bending within 3°.
Cr-Au coating is formed as a 30 nm Au film with a 20 nm Cr sublayer, which is deposited for better adhesion of Au. The coating is formed on both tipside and backside of the cantilever.

AFM Tip:

  • AFM Cantilever:

  • Beam
  • 125 µm
  • 25 µm
  • 2.1 µm
  • 5 N/m (1.8 - 13 N/m)*
  • 160 kHz (110 - 220 kHz)*
  • * typical range This product features alignment grooves on the back side of the holder chip.

    Give us your feedback

    Did we miss any relevant information of this product?
    Did you find this or a comparable product for a better price?