Cantilevers of the 19 series combine the high frequency and low spring constant, which makes them applicable to imaging soft and fragile surfaces at a relatively high speed in Tapping mode. They are compatible with Bruker ScanAsyst® PeakForce Tapping™**. The cantilevers may also be useful in LFM due to the high sensitivity to the lateral forces.
Probes with overall conductive chemically inert 30 nm Au coating with 20 nm Cr sublayer on the tip and backside of the cantilever. Resulting tip radius is below 35 nm. The coating may cause cantilever bending within 3°.
Cr-Au coating is formed as a 30 nm Au film with a 20 nm Cr sublayer, which is deposited for better adhesion of Au. The coating is formed on both tip side and backside of the cantilever.
0.5 N/m (0.05 - 2.3 N/m)*
65 kHz (25 - 120 kHz)*
* typical range This product features alignment grooves on the back side of the holder chip.
Give us your feedback
Did we miss any relevant information of this product?
Did you find this or a comparable product for a better price?