AFM Probes » qp-HBC

 Order  Request a quote (RFQ)
Order Code Price
qp-HBC-10 Box of 10 AFM Probes
qp-HBC-50 Box of 50 AFM Probes
€1 329.00
You save 366.00 EUR or 21.60% with this box
Product availability: On stock
esd kit

ESD Kit recommended with this product. Click here to order: ESD Kit


uniqprobe™ - HeartBeat Cantilever for ScanAsyst** and Peak Force Tapping**

Coating: Reflex Aluminum
Tip shape: Circular symmetric
F 60 kHz
C 0.5 N/m
L 115 µm
*nominal values

NANOSENSORS qp-HBC AFM probes are designed for use in ScanAsyst® or PeakForceTapping™** in air. The qp-HBC probes are also compatible for contact and non-contact or soft tapping mode AFM imaging The combination of soft cantilever and fairly high resonance frequency enables stable and fast measurements with reduced tip-sample interaction.

The NANOSENSORS uniqprobe combines the well-known features of the other NANOSENSORS AFM probe series such as high application versatility and compatibility with most commercial SPMs with the additional advantage of a strongly reduced dispersion of force constant and resonance frequency.

The unsurpassed uniformity of the mechanical characteristics of the uniqprobe series is particularly important for applications, where a large number of probes with known and near identical force constants or resonance frequencies are needed.

The probe offers unique features:

  • compatible for use in ScanAsyst® or PeakForceTapping™** in air 
  • small dispersion of force constant and resonance frequency 
  • circular symmetric tip shape with a hyperbolic profile
  • typical tip height 7µm 
  • typical tip radius of curvature smaller than 10nm
  • Al coating on detector side of cantilever
  • tip and cantilevers are made of a quartz-like material
  • alignment grooves on backside of silicon holder chip
  • tip repositioning accuracy of better than ± 8µm (in combination with Alignment Chip)
  • chemically inert
The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the cantilever which enhances the reflectivity of the laser beam. Furthermore it prevents light from interfering within the cantilever. The virtually stress-free coating is bending the cantilever less than 3.5% of the cantilever length.

AFM Tip:

  • AFM Cantilever:

  • Triangle
  • 0.5 N/m (0.35 - 0.8 N/m)*
  • 60 kHz (45 - 75 kHz)*
  • 115 µm (110 - 120 µm)*
  • 25 µm (24 - 26 µm)*
  • 1000 nm (970 - 1030 nm)*
  • * guaranteed range This product features alignment grooves on the back side of the holder chip.

    Give us your feedback

    Did we miss any relevant information of this product?
    Did you find this or a comparable product for a better price?