AFM Probes » NW-DT-NCLR

 Order  Request a quote (RFQ)
Order Code Price
Quantity
NW-DT-NCLR-10 Box of 10 AFM Probes
$1 119.00
NW-DT-NCLR-20 Box of 20 AFM Probes
$2 003.00
You save 235.00 USD or 10.50% with this box
NW-DT-NCLR-50 Box of 50 AFM Probes
$4 419.00
You save 1176.00 USD or 21.00% with this box

NW-DT-NCLR

Diamond Coated Tapping Mode AFM Probe with Long Cantilever

Coating: Diamond
Tip shape: Standard
Cantilever:
F 210 kHz
C 72 N/m
L 225 µm
*nominal values
NanoWorld Pointprobe® NCL probes are designed for non-contact or tapping™ mode imaging and offer an alternative to our high frequency non-contact type NCH. The NCL type is recommended if the feedback loop of the microscope does not accept high frequencies or if the detection system needs a minimum cantilever length (> 125 µm). This probe combines high operation stability with outstanding sensitivity. Compared to the high frequency non-contact type NCH the maximum scanning speed is slightly reduced.

All probes of the Pointprobe® series are made from monolithic silicon which is highly doped to dissipate static charge. They are chemically inert and offer a high mechanical Q-factor for high sensitivity. The tip is shaped like a polygon based pyramid.

For applications that require hard contact between tip and sample this probe offers a real diamond tip-side coating. This coating features extremely high wear resistance due to the unsurpassed hardness of diamond.

The typical macroscopic tip radius of curvature lies in the range between 100 and 200 nm. Nanoroughnesses in the 10 nm regime improve the resolution on flat surfaces.

Diamond Coating / Aluminum Reflex Coating

The diamond coating consists of a 100 nm thick polycrystalline diamond layer deposited on the tip side of the cantilever resulting in an unsurpassed hardness of the tip.

The aluminum reflex coating deposited on the detector side of the cantilever enhances the reflectance of the laser beam and prevents light from interfering within the cantilever.

AFM Tip:

  • AFM Cantilever:

  • Beam
  • 225 µm (220 - 230 µm)*
  • 37.5 µm (32.5 - 42.5 µm)*
  • 7 µm (6.5 - 7.5 µm)*
  • 72 N/m (48 - 105 N/m)*
  • 210 kHz (175 - 245 kHz)*
  • * typical range This product features alignment grooves on the back side of the holder chip.

    Give us your feedback

    Did we miss any relevant information of this product?
    Did you find this or a comparable product for a better price?