AFM Probes  »  
 Request a quote (RFQ)
Order Code / Price*
PNP-TRS-20 Box of 20 AFM Probes
506.00 USD
Price shown as ex-works and subjected to shipping charges, insurance, local VAT and custom duties respectively where applicable


Silicon Nitride AFM Probe Single Cantilever Compatible with ScanAsyst®** Mode

Manufacturer: NanoWorld

Coating: Reflective Gold
AFM tip shape: Pyramid
AFM Cantilever
F 67 kHz
C 0.32 N/m
L 100 µm
*nominal values
How to optimize AFM scan parameters gear icon

Pyrex-Nitride Probe – TRiangular Single Cantilever
Leading edge in sharpness and durability

NanoWorld Pyrex-Nitride PNP-TRS AFM probes are designed for various imaging applications in contact or dynamic mode and can also be used for ScanAsyst®** mode in air.

The Pyrex-Nitride TRS AFM probes have a single silicon nitride AFM cantilever with a very low force constant and an integrated oxide sharpened, pyramidal AFM tip with a height of 3.5 µm. The AFM tip is located 4 µm behind the free end of the cantilever. The AFM probe series features a support chip that is made of Pyrex.

All chips are pre-separated prior to shipment and come in Gel-Pak containers.

Additionally, this AFM probe offers an excellent radius of curvature.

** ScanAsyst® and Peak Force Tapping® are registered trademarks of Bruker Corporation.

Gold Reflex Coating

The gold reflex coating consists of a 70 nm thick gold layer deposited on the detector side of the AFM cantilevers which enhances the reflectance of the laser beam. Furthermore it prevents light from interfering within the AFM cantilever.

As the coating is almost stress-free the bending of the AFM cantilever due to stress is less than 2 degrees.
AFM Tip:

  • AFM Cantilever:
  • Triangle
  • 0.32 N/m
  • 67 kHz
  • 100 µm
  • 13.5 µm
  • 500 nm
  • Loading