Please note:

NanoAndMore GmbH does not ship to your country

You can switch to our colleagues from from the top of the page.

AFM Probes  »  
USC-F1.2-k0.15
 Order
 Request a quote (RFQ)
Order Code / Price*
Quantity
USC-F1.2-k0.15-10 Box of 10 AFM Probes
1093.00 EUR
Product availability: On stock
3D view SEM image of Ultrashort (USC) AFM cantilever
Front view SEM image of USC AFM tip
Close-up 3D view SEM image of Ultrashort (USC) AFM cantilever

USC-F1.2-k0.15

Ultra-Short Cantilever (USC) mainly dedicated to High-Speed AFM applications in liquid

Manufacturer: NanoWorld

Coating: Reflective Gold
AFM tip shape: Cone Shaped,EBD
AFM Cantilever
F 1200 kHz
C 0.15 N/m
L 7 µm
*nominal values
Applications
How to optimize AFM scan parameters gear icon
NanoWorld Ultra-Short Cantilevers (USC) for High-Speed AFM (HS-AFM) combine very small AFM cantilevers capable of resonating in the MHz regime and a very sharp and wear resistant AFM tip.
 
The AFM cantilever of the USC series is rectangular and made of a quartz-like material. A gold layer is deposited on both sides of the AFM cantilever in order to enhance the reflectance of the laser beam, but the AFM tip remains uncoated.

The wear resistant AFM tip has been developed together with nanotools GmbH and sustains high velocity scans over long distances. It is made of High Density Carbon/Diamond Like Carbon (HDC/DLC) material which is hard and wear resistant. It has a height of 2.5 microns and a radius of curvature smaller than 10 nm. The aspect ratio is in the order of 5 : 1 and the tilt compensation is 8° ensuring more symmetric AFM images.

The silicon support chip is of standard dimensions (1.6 mm x 3.4 mm x 0.3 mm). Additionally, it has etched and lowered corners in order to avoid contact between the support chip and the sample when scanning. Moreover it features alignment grooves on the back side of the silicon support chip which ensure replacement of the AFM probes without major adjustment of the laser beam when used in conjunction with the alignment chip.

The type USC-F1.2-k0.15 is mainly designed for High-Speed AFM applications in liquid but can also be used for applications in air (depending on the application).

This AFM probe features alignment grooves on the back side of the holder chip.

Gold Reflex Coating

The gold reflex coating consists of a 30 nm thick gold layer deposited on both sides of the AFM cantilevers which enhances the reflectance of the laser beam. Furthermore it prevents light from interfering within the AFM cantilever. As the coating is almost stress-free the bending of the AFM cantilevers due to stress is less than 2 degrees

The AFM tip remains uncoated.
AFM Tip:

    • AFM Cantilever:
  • Beam
  • 0.15 N/m (0.06 - 0.3 N/m)*
  • 1200 kHz (800 - 1600 kHz)*
  • 7 µm (6 - 8 µm)*
  • 2 µm (1.5 - 2.5 µm)*
  • 0.08 µm ( 0.06 - 0.1 µm)*
    • * typical range
    Actin filaments
    Actin filaments

    Actin filament on Mica with APTES. Buffer: 100 mM KCl, 2 mM MgCl2, 1 mM EGTA, 20 mM Imidazole-HCl, pH7.6.

    Scanned with a NanoWorld USC-F1.2-k0.15 AFM probe in High Speed Scanning mode. Scan size 250×250 nm2

    Image courtesy of Prof. Kodera, nanoLSI, Kanazawa University, Japan

    Actin filaments
    Actin filaments

    Actin filament on Mica with APTES. Buffer: 100 mM KCl, 2 mM MgCl2, 1 mM EGTA, 20 mM Imidazole-HCl, pH7.6.

    Scanned with a NanoWorld USC-F1.2-k0.15 AFM probe in High Speed Scanning mode. Scan size 400×400 nm2

    Image courtesy of Prof. Kodera, nanoLSI, Kanazawa University, Japan

    Actin filaments 250×250 nm2 and 400×400 nm2
    Actin filaments 250×250 nm2 and 400×400 nm2

    Actin filament on Mica with APTES. Buffer:100 mM KCl, 2 mM MgCl2, 1 mM EGTA, 20 mM Imidazole-HCl, pH7.6 Observed by HS-AFM.

    Scanned with a NanoWorld USC-F1.2-k0.15

    Image courtesy of Prof. Kodera, nanoLSI, Kanazawa University, Japan

    Interested in learning about how this AFM probe has been used by fellow researchers?
    Visit the manufacturer’s website for a list of publications mentioning this AFM probe.

    View this product on manufacturer's website
    Learn more about this and other AFM Tips
    Learn more about this and other AFM Cantilevers
    Similar Cantilevers: Rectangular / Diving Board AFM Cantilevers Trapezoidal Cross Section with Curved Sides AFM Cantilevers Quartz-like AFM Cantilevers 1 Single AFM Cantilever per AFM Probe Backside Gold Coated AFM Cantilevers
    Similar Tips: Spike AFM Tips Electron Beam Deposited AFM Tips High Density Carbon AFM Tips (Electron Beam Deposited) Uncoated AFM Tips
    Loading
    nanosensors-logo
    nanoworld-logo
    budgetsensors-logo
    mikromasch-logo
    opus-logo
    sqube-logo
    nanotools-logo