AFM Probes  »  
 Request a quote (RFQ)
Order Code / Price*
HQ:NSC16/Pt-15 Box of 15 AFM Probes
395.00 EUR
HQ:NSC16/Pt-50 Box of 50 AFM Probes
1120.00 EUR
Your volume discount is 196.67 EUR or 14.90%
HQ:NSC16/Pt-100 Box of 100 AFM Probes
2050.00 EUR
Your volume discount is 583.33 EUR or 22.20%
Product availability: On stock
Get a free MikroMasch poster


Electrical, Tapping Mode AFM Probe with Long AFM Cantilever

Manufacturer: MikroMasch

Coating: Electrically Conductive
AFM tip shape: Rotated
AFM Cantilever
F 190 kHz
C 45 N/m
L 225 µm
*nominal values
How to optimize AFM scan parameters gear icon

AFM cantilevers of the 16 series with high spring constant and low resonance frequency (below 250 kHz) can be used in tapping mode in SPM that has a low-frequency feedback loop. These AFM cantilevers also fit SPM systems that do not support AFM probes with short lever arms.

AFM probes with overall conductive chemically inert 30 nm Pt coating on the tip and back side of the AFM cantilever. Resulting AFM probe tip radius is about 30 nm."

This AFM probe features alignment grooves on the back side of the holder chip.

The 30 nm conductive Pt coating is continuous from the tip end to the bulk of the silicon chip. The coating covers both the tip and the back side of the AFM cantilever.
AFM Tip:

  • AFM Cantilever:
  • Beam
  • 45 N/m (30 - 70 N/m)*
  • 190 kHz (170 - 210 kHz)*
  • 225 µm (220 - 230 µm)*
  • 37.5 µm (34.5 - 40.5 µm)*
  • 7 µm ( 6.5 - 7.5 µm)*
  • * typical range