AFM Probes  »  
 Order
 Request a quote (RFQ)
Order Code / Price*
Quantity
PPP-NCLR-10 Box of 10 AFM Probes
328.00 EUR
PPP-NCLR-50 Box of 50 AFM Probes
1296.00 EUR
Your volume discount is 344.00 EUR or 21.00%
PPP-NCLR-W Box of 380 AFM Probes
6802.00 EUR
Your volume discount is 5662.00 EUR or 45.40%
Product availability: On stock

PPP-NCLR

Tapping Mode AFM Probe, Long AFM Cantilever

Manufacturer: NANOSENSORS

Coating: Reflective Aluminum
AFM tip shape: Standard
AFM Cantilever
F 190 kHz
C 48 N/m
L 225 µm
*nominal values
Applications
How to optimize AFM scan parameters gear icon

The PointProbe® Plus (PPP) combines high application versatility and compatibility with most commercial SPMs. The typical AFM tip radius of less than 7 nm and the minimized variation in AFM tip shape provide reproducible images and enhanced resolution.

NANOSENSORS™ PPP-NCLR AFM probes are designed for non-contact mode or tapping mode AFM (also known as: attractive or dynamic mode). The NCL type is offered as an alternative to NANOSENSORS™ high frequency non contact type (NCH). PPP-NCLR is recommended if the feedback loop of the microscope does not accept high frequencies (400kHz) or if the detection system needs a minimum AFM cantilever length >125µm. Compared to the high frequency non-contact type NCH the maximum scanning speed is slightly reduced. This AFM probe type combines high operation stability with outstanding sensitivity and fast scanning ability.

The AFM probe offers unique features:

  • excellent AFM tip radius of curvature
  • highly doped silicon to dissipate static charge
  • Al coating on detector side of AFM cantilever
  • high mechanical Q-factor for high sensitivity
  • precise alignment of the AFM cantilever position (within +/-2µm) when used with the Alignment Chip
  • compatible with PointProbe® Plus XY-Alignment Series

This AFM probe features alignment grooves on the back side of the holder chip.

The reflective coating is an approximately 30 nm thick aluminum coating on the detector side of the AFM cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the AFM cantilever. As the coating is nearly stress-free the bending of the AFM cantilever due to stress is less than 2 degrees.
AFM Tip:

  • AFM Cantilever:
  • Beam
  • 48 N/m (21 - 98 N/m)*
  • 190 kHz (146 - 236 kHz)*
  • 225 µm (215 - 235 µm)*
  • 38 µm (30 - 45 µm)*
  • 7 µm ( 6 - 8 µm)*
  • * guaranteed range
    Loading
    nanosensors-logo
    nanoworld-logo
    budgetsensors-logo
    mikromasch-logo
    opus-logo
    sqube-logo
    nanotools-logo