AFM Probes » SSS-NCLR

 Order
 Request a quote (RFQ)
Order Code / Price*
Quantity
SSS-NCLR-10 Box of 10 AFM Probes
757.00 USD
SSS-NCLR-20 Box of 20 AFM Probes
1 355.00 USD
Your volume discount is 159.00 USD or 10.50%
SSS-NCLR-50 Box of 50 AFM Probes
2 988.00 USD
Your volume discount is 797.00 USD or 21.10%
Product availability: On stock

SSS-NCLR

SuperSharp, Tapping Mode AFM Probe with Long AFM Cantilever

Manufacturer: NANOSENSORS

Coating: Reflex Aluminum
AFM tip shape: Supersharp
AFM Cantilever
F 190 kHz
C 48 N/m
L 225 µm
*nominal values

Applications

How to optimize AFM scan parameters gear icon

NANOSENSORS™ SSS-NCLR AFM probes are designed for non-contact mode or tapping mode AFM. They are offered as an alternative to the NANOSENSORS™ high frequency non contact type (NCH). The SSS-NCLR is recommended if the feedback loop of the microscope does not accept high frequencies (400 kHz) or if the detection system needs a minimum AFM cantilever length > 125 µm. Compared to the high frequency non-contact type NCH the maximum scanning speed is slightly reduced. This AFM probe combines high operation stability with outstanding sensitivity and fast scanning ability.

For enhanced resolution of nanostructures and microroughness we offer our SuperSharpSilicon™ AFM tip with unrivalled sharpness.

The AFM probe offers unique features:

  • excellent AFM tip radius of curvature
  • typical aspect ratio at 200 nm from AFM tip apex in the order of 4:1
  • highly doped silicon to dissipate static charge
  • high mechanical Q-factor for high sensitivity
  • precise alignment of the AFM cantilever position (within +/- 2 µm) when used with the Alignment Chip
  • compatible with PointProbe® Plus XY-Alignment Series

This product features alignment grooves on the back side of the holder chip.

The reflex coating is an approximately 30 nm thick aluminum coating on the detector side of the AFM cantilever which enhances the reflectivity of the laser beam by a factor of about 2.5. Furthermore it prevents light from interfering within the AFM cantilever. The virtually stress-free coating is bending the AFM cantilever less than 2% of the AFM cantilever length.

AFM Tip:


  • AFM Cantilever:

  • Beam
  • 48 N/m (21 - 98 N/m)*
  • 190 kHz (146 - 236 kHz)*
  • 225 µm (215 - 235 µm)*
  • 38 µm (30 - 45 µm)*
  • 7 µm ( 6 - 8 µm)*
  • * typical range
    Loading
    nanosensors-logo
    nanoworld-logo
    budgetsensors-logo
    mikromasch-logo
    opus-logo
    nanotools-logo