AFM Probes » USC-F5-k30

 Request a quote (RFQ)
Order Code / Price*
USC-F5-k30-10 Box of 10 AFM Probes
980.00 USD
Product availability: On stock


Ultra-Short Cantilever (USC) mainly dedicated to dynamic High-Speed AFM applications in air

Manufacturer: NanoWorld

Coating: Reflex Gold
Tip shape: Cone Shaped, EBD
F 5000 kHz
C 30 N/m
L 10 µm
*nominal values


NanoWorld Ultra-Short Cantilevers (USC) for High-Speed AFM (HS-AFM) combine very small cantilevers capable of resonating in the MHz regime and a very sharp and wear resistant tip.
The cantilever of the USC series is rectangular and made of a quartz-like material. A gold layer is deposited on both sides of the cantilever in order to enhance the reflectance of the laser beam, but the tip remains uncoated.

The wear resistant tip has been developed together with nanotools GmbH and sustains high velocity scans over long distances. It is made of High Density Carbon/Diamond Like Carbon (HDC/DLC) material which is hard and wear resistant. It has a height of 2.5 microns and a radius of curvature smaller than 10 nm. The aspect ratio is in the order of 5 : 1 and the tilt compensation is 8° ensuring more symmetric AFM images.

The silicon support chip is of standard dimensions (1.6 mm x 3.4 mm x 0.3 mm). Additionally it has etched and lowered corners in order to avoid contact between the support chip and the sample when scanning. Moreover it features alignment grooves on the back side of the silicon support chip which ensure replacement of the probes without major adjustment of the laser beam when used in conjunction with the alignment chip.

The type USC-F5-k30 is mainly designed for High-Speed AFM applications in non-contact mode in air but can also be used for other applications.

This product features alignment grooves on the back side of the holder chip.

Gold Reflex Coating

The gold reflex coating consists of a 30 nm thick gold layer deposited on both sides of the cantilevers which enhances the reflectance of the laser beam. Furthermore it prevents light from interfering within the cantilever. As the coating is almost stress-free the bending of the cantilevers due to stress is less than 2 degrees

The tip remains uncoated.

AFM Tip:

  • AFM Cantilever:

  • Beam
  • 30 N/m (20 - 50 N/m)*
  • 5000 kHz (4000 - 6000 kHz)*
  • 10 µm (9 - 11 µm)*
  • 5 µm (4.5 - 5.5 µm)*
  • 0.68 µm ( 0.66 - 0.7 µm)*
  • * typical range
    nanosensors-logo nanoworld-logo budgetsensors-logo mikromasch-logo opus-logo nanotools-logo