AFM Probes » HQ:NSC18/Co-Cr/Al BS

HQ:NSC18/Co-Cr/Al BS

Hard Magnetic, Medium Momentum AFM Probe

Coating: Magnetic
Tip shape: Rotated
Cantilever:
F 75 kHz
C 2.8 N/m
L 225 µm
*nominal values
Cantilevers of the 18 series are optimal for the Lift mode operation AFM as they provide high stability in tapping mode as well as high sensitivity to magnetic and electric forces that may be weak. These cantilevers are also used for mapping of materials properties in Force modulation mode and the true topography imaging of the soft samples.

The coating consists of a Co layer on the tipside of the cantilever. The Co layer is formed as a polycrystalline film, which allows steady permanent magnetization in the direction of the tip axis. All chips are pre-magnetized at the facility before shipping to end users. In some cases additional magnetization by an arbitrary strong magnet is required, e.g. SmCo or NdFeB.

The Co coating is protected from oxidation by a thin Cr layer, resulting in longer cantilever performance.
Co and Cr layer on the tipside of the cantilever. Aluminum coating with thickness 30 nm on the backside of the cantilever.

AFM Tip:

  • AFM Cantilever:

  • Beam
  • 225 µm
  • 27.5 µm
  • 3 µm
  • 2.8 N/m (1.2 - 5.5 N/m)*
  • 75 kHz (60 - 90 kHz)*
  • * typical range This product features alignment grooves on the back side of the holder chip.

    Give us your feedback

    Did we miss any relevant information of this product?
    Did you find this or a comparable product for a better price?